Disclaimer about 3D Printing:
Before purchasing any product from 3dbrainlab.com please be sure that you are aware of some of the dangers associated with 3D Printing including other suppliers and manufacturers.
Although 3D printing can be performed by responsible adults, 3D Brain Lab and 3dbrainlab.com cannot be responsible for your health and safety while using any of our products. We will be happy to answer any questions you have before you place an order.
Building and operating 3D printers involves electricity, so all necessary precautions should be taken. If you’re not sure, just ask us. All 3D printers we sell run on 12V or 24V supplied by a AC to DC power supply, so you should never be exposed to more than 24V. But remember, there can still be high currents involved, and they should not be taken lightly.
High temperatures are involved with 3D printing. The nozzle of the hot end runs at temperatures up to 300°C (572°F). Heated beds can reach temperatures up to 120°C (248°F), hotter than boiling water and the melted plastic extruded will be around 200°C (400°F). Special care is required when handling these parts of the printer during operation.
Before using any of our products, be sure the area you are working in is well ventilated allowing fresh air to come in. Additionally, although it is common practice, we do not suggest leaving your printer running unattended we we cannot be held responsible for any loss, damage, injury, or other negative result from building or using the printer.
If you smell anything or your eyes get watery or irritated, call 911 and seek medical attention immediately
Finally, please read our warning on Proposition 65 for California Residents https://www.3dbrainlab.com/pages/proposition-65-faq