Estimated Arrival: Between Nov 26 and Nov 29. *ETA to USA Only
Shipping & Returns: Free Shipping to the lower 48 states on orders valued at $50 or more.
Phrozen TR250LV Resin - 5 KG
Phrozen TR250LV is a great resin for engineering parts and (dental) thermoforming applications that have to take some heat. It can withstand temperatures of over 150° C.
Perfect resin for the Phrozen Transform.
XY Planar Resolution: 47 micron
Z Resolution (Layer Height): 30-100um
Normal layer time: 15 sec @ 50 um
Property: High hardness, toughness and resolution.
Way to Rinse：Clean with alcohol spray with air gun
Suitable for: LCD 3D Printer
Application: Rubber Mold for Jewelry, Fine Details GK Kit, Heat Resistance Application
Heat resistant up to 150° C
Viscosity: 230 cps
Density: 1.10 g / cm3
Tensile Stress (Break): 68 MPa
Tensile Modulus: 1050 MPa
Hardness: Shore 79D
Elongation: 20 %
I-Zod Impact: 6.31 KJ/m2
Heat Deflection Temperature @0.45MPa: > 150C
Suggest to use resin and printer indoor under ventilated conditions.
Avoid exposure to sunlight and indoor luminescence.
Please preserve resin in closed opaque bottle to avoid exposure to air.
Do not mix used and non-used resin together.
Please keep the resin away from kids.
Do not dump resin. Please cure resin and treat/recycle it as general plastics garbage.
SafetyDo not eat and swallow the resin. Go to hospital if necessary.
Wear goggles to avoid eye contact with resin. Wash your eyes with water and go to hospital if necessary.
Resin might cause slight irritation to skin. Wear gloves when handling. Stop using if allergic reaction occurs.
Resin has slight odor. We strongly suggest you use it under ventilated conditions.
Suggested safety equipment: gloves, mask, goggles, and lab coat.
Keep resin in room temperature (15 – 35 OC) and dry condition.